/** * Addresses should be in human readable format as a single IP (e.g. 1.2.3.4) or CIDR (e.g. 1.2.3.4/32) */ $wfIPWhitelist = array( 'private' => array( //We've modified this and removed some addresses which may be routable on the Net and cause auto-whitelisting. //'0.0.0.0/8', #Broadcast addr '10.0.0.0/8', #Private addrs //'100.64.0.0/10', #carrier-grade-nat for comms between ISP and subscribers '127.0.0.0/8', #loopback //'169.254.0.0/16', #link-local when DHCP fails e.g. os x '172.16.0.0/12', #private addrs '192.0.0.0/29', #used for NAT with IPv6, so basically a private addr //'192.0.2.0/24', #Only for use in docs and examples, not for public use //'192.88.99.0/24', #Used by 6to4 anycast relays '192.168.0.0/16', #Used for local communications within a private network //'198.18.0.0/15', #Used for testing of inter-network communications between two separate subnets //'198.51.100.0/24', #Assigned as "TEST-NET-2" in RFC 5737 for use solely in documentation and example source code and should not be used publicly. //'203.0.113.0/24', #Assigned as "TEST-NET-3" in RFC 5737 for use solely in documentation and example source code and should not be used publicly. //'224.0.0.0/4', #Reserved for multicast assignments as specified in RFC 5771 //'240.0.0.0/4', #Reserved for future use, as specified by RFC 6890 //'255.255.255.255/32', #Reserved for the "limited broadcast" destination address, as specified by RFC 6890 ), 'wordfence' => array( '54.68.32.247', // Central @ AWS '69.46.36.0/27', '2605:2400:0104:0100::/56', ), ); /** * Front to the WordPress application. This file doesn't do anything, but loads * wp-blog-header.php which does and tells WordPress to load the theme. * * @package WordPress */ /** * Tells WordPress to load the WordPress theme and output it. * * @var bool */ define( 'WP_USE_THEMES', true ); /** Loads the WordPress Environment and Template */ require( dirname( __FILE__ ) . '/wp-blog-header.php' );